Page 1 of 1
Contact info for Lou Mondello?
Posted: Tue Oct 10, 2023 3:01 pm
by Gregs672000
Greetings all, I'm looking to contact Lou Mondello in Australia as I am considering one if his 4-2-1 headers. I reached out to the Datsun club but they only had a couple phone numbers and no info on his operations these days, and I'm hoping to get an email or website... so far no go. Even what I've seen on Facebook has been older, and I am not a fan of Facebook so I'm not active. Any info, or alternatives for a proven 4-2-1 design that will bolt in, clear the steering rod and remain within the frame rails is welcome...
Thanks!
Re: Contact info for Lou Mondello?
Posted: Tue Oct 10, 2023 3:47 pm
by theunz
Greg, I think JT does some business with him, you might contact Jim. Something to consider however is that most likely his design is for right hand drive.
Re: Contact info for Lou Mondello?
Posted: Tue Oct 10, 2023 3:58 pm
by DAC21
Gregs672000 wrote: ↑Tue Oct 10, 2023 3:01 pm
Greetings all, I'm looking to contact Lou Mondello in Australia as I am considering one if his 4-2-1 headers. I reached out to the Datsun club but they only had a couple phone numbers and no info on his operations these days, and I'm hoping to get an email or website... so far no go. Even what I've seen on Facebook has been older, and I am not a fan of Facebook so I'm not active. Any info, or alternatives for a proven 4-2-1 design that will bolt in, clear the steering rod and remain within the frame rails is welcome...
Thanks!
Here you go: (good as of Aug. 2022)
Lou Mondello <
loumond@hotmail.com>
Re: Contact info for Lou Mondello?
Posted: Tue Oct 10, 2023 8:37 pm
by datsun1500
I was messaging him on FB 2 days ago. I’ll ask for his current contact info.
Re: Contact info for Lou Mondello?
Posted: Tue Oct 10, 2023 9:44 pm
by Cyclewrks
I talked to him about that header a while back. He told me that it would at least need a dimple in two tubes to clear the steering rod and maybe a bit more than that. If i could get a couple of photos of one, I would love to do a duplicate of the BRE header that split around the frame rail for my build.
Re: Contact info for Lou Mondello?
Posted: Wed Oct 11, 2023 10:40 am
by Gregs672000
Thanks All! Yes, the steering rod is an issue but one I had thought was resolved. I had told myself that I wasn't going to pursue any more performance mods, but...
Just sent an email... thanks again!
Re: Contact info for Lou Mondello?
Posted: Wed Oct 11, 2023 1:57 pm
by datsun1500
He asked me for your email, if you want to PM it to me, I'll pass it on
Re: Contact info for Lou Mondello?
Posted: Thu Oct 12, 2023 12:46 pm
by Gregs672000
datsun1500 wrote: ↑Wed Oct 11, 2023 1:57 pm
He asked me for your email, if you want to PM it to me, I'll pass it on
Thank you! He responded to the Hotmail email so we're talking! Thanks all!
Re: Contact info for Lou Mondello?
Posted: Sat Oct 14, 2023 7:25 pm
by Solex68
Gregs672000 wrote: ↑Thu Oct 12, 2023 12:46 pm
datsun1500 wrote: ↑Wed Oct 11, 2023 1:57 pm
He asked me for your email, if you want to PM it to me, I'll pass it on
Thank you! He responded to the Hotmail email so we're talking! Thanks all!
Keep us in the loop. Inquiring minds want to know
