Contact info for Lou Mondello?

General topics.

Moderators: notoptoy, S Allen, Solex68

Post Reply
User avatar
Gregs672000
Roadster Fanatic-Site Supporter
Posts: 9263
Joined: Fri Aug 07, 2009 11:47 pm
Location: Tacoma, WA

Contact info for Lou Mondello?

Post by Gregs672000 »

Greetings all, I'm looking to contact Lou Mondello in Australia as I am considering one if his 4-2-1 headers. I reached out to the Datsun club but they only had a couple phone numbers and no info on his operations these days, and I'm hoping to get an email or website... so far no go. Even what I've seen on Facebook has been older, and I am not a fan of Facebook so I'm not active. Any info, or alternatives for a proven 4-2-1 design that will bolt in, clear the steering rod and remain within the frame rails is welcome...
Thanks!
:smt006
Greg Burrows
'67 2000 #588
Tacoma, WA
Top
User avatar
theunz
Roadster Nut-Site Supporter
Posts: 2448
Joined: Sat May 02, 2009 1:54 pm
Location: Catoosa Ok.
Model: 2000
Year: High Windshield-68-70

Re: Contact info for Lou Mondello?

Post by theunz »

Greg, I think JT does some business with him, you might contact Jim. Something to consider however is that most likely his design is for right hand drive.
Mike M

Old enough to know better, too old to remember why!


1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
Top
DAC21
Roadster Fanatic-Site Supporter
Posts: 1216
Joined: Tue Sep 15, 2020 7:44 am
Location: California
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: Contact info for Lou Mondello?

Post by DAC21 »

Gregs672000 wrote: ↑Tue Oct 10, 2023 3:01 pm Greetings all, I'm looking to contact Lou Mondello in Australia as I am considering one if his 4-2-1 headers. I reached out to the Datsun club but they only had a couple phone numbers and no info on his operations these days, and I'm hoping to get an email or website... so far no go. Even what I've seen on Facebook has been older, and I am not a fan of Facebook so I'm not active. Any info, or alternatives for a proven 4-2-1 design that will bolt in, clear the steering rod and remain within the frame rails is welcome...
Thanks!
:smt006
Here you go: (good as of Aug. 2022)

Lou Mondello <loumond@hotmail.com>
1967 1600 in waiting SPL311-09002 / R-28178
2018 Hyundai Elantra GT Sport Ultimate
Top
User avatar
datsun1500
Roadsteraholic
Posts: 1338
Joined: Wed Sep 19, 2007 8:24 pm

Re: Contact info for Lou Mondello?

Post by datsun1500 »

I was messaging him on FB 2 days ago. I’ll ask for his current contact info.
I remember when no one wanted the 1500s......
Top
User avatar
Cyclewrks
Roadster Fanatic
Posts: 120
Joined: Wed Feb 03, 2016 1:30 am
Location: Nashville, TN area
Model: 1500/1600
Year: High Windshield-68-70

Re: Contact info for Lou Mondello?

Post by Cyclewrks »

I talked to him about that header a while back. He told me that it would at least need a dimple in two tubes to clear the steering rod and maybe a bit more than that. If i could get a couple of photos of one, I would love to do a duplicate of the BRE header that split around the frame rail for my build.
"Life is not a journey to the grave intent to arrive safely in a pretty, well preserved body-but rather arriving in a broadside skid, thoroughly used up, totally worn out and loudly proclaiming "Damn, what a friggin ride!"- Anon
'70 1600
Top
User avatar
Gregs672000
Roadster Fanatic-Site Supporter
Posts: 9263
Joined: Fri Aug 07, 2009 11:47 pm
Location: Tacoma, WA

Re: Contact info for Lou Mondello?

Post by Gregs672000 »

Thanks All! Yes, the steering rod is an issue but one I had thought was resolved. I had told myself that I wasn't going to pursue any more performance mods, but...
Just sent an email... thanks again!
:smt006
Greg Burrows
'67 2000 #588
Tacoma, WA
Top
User avatar
datsun1500
Roadsteraholic
Posts: 1338
Joined: Wed Sep 19, 2007 8:24 pm

Re: Contact info for Lou Mondello?

Post by datsun1500 »

He asked me for your email, if you want to PM it to me, I'll pass it on
I remember when no one wanted the 1500s......
Top
User avatar
Gregs672000
Roadster Fanatic-Site Supporter
Posts: 9263
Joined: Fri Aug 07, 2009 11:47 pm
Location: Tacoma, WA

Re: Contact info for Lou Mondello?

Post by Gregs672000 »

datsun1500 wrote: ↑Wed Oct 11, 2023 1:57 pm He asked me for your email, if you want to PM it to me, I'll pass it on
Thank you! He responded to the Hotmail email so we're talking! Thanks all!
Greg Burrows
'67 2000 #588
Tacoma, WA
Top
User avatar
Solex68
Site Supporter
Posts: 2178
Joined: Fri May 25, 2012 3:30 pm
Location: Laguna Hills, CA
Model: 2000
Year: High Windshield-68-70
Contact:
Contact Solex68

Re: Contact info for Lou Mondello?

Post by Solex68 »

Gregs672000 wrote: ↑Thu Oct 12, 2023 12:46 pm
datsun1500 wrote: ↑Wed Oct 11, 2023 1:57 pm He asked me for your email, if you want to PM it to me, I'll pass it on
Thank you! He responded to the Hotmail email so we're talking! Thanks all!
Keep us in the loop. Inquiring minds want to know :)
Greg a.k.a SOLEX68 - http://www.datsunvents.com/
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: All steering components, Stan Stealth Dizzy
Top
Post Reply

Return to “General Discussion”