Page 1 of 1
Body to frame pads
Posted: Wed Dec 28, 2022 11:08 pm
by D P
This question is bordering on the stupid side. Can someone please confirm that all of the pads shown below, both the blue rectangles and the red circles, 20 in total, are all three eights of an inch thick? I assume similar durometers of the materials is preferred…
Re: Body to frame pads
Posted: Wed Dec 28, 2022 11:56 pm
by Nissanman
Dean at Datsunparts.com has the correct rubbers for the
RED mounts.
https://datsunparts.com/collections/body-parts
The other pads are 10mm/3/8" and are a buffer between the body shell and the chassis.
Their length dimension is quite generous.
Be careful with the two pads that run across the rear crossmember.
Find out where your fuel tank loom is so there is a gap for it between the pads.
Re: Body to frame pads
Posted: Thu Dec 29, 2022 11:32 am
by JT68
https://www.datsunrestorationproducts.c ... mount-pads
Correct fiber reinforced material. 14 is the correct count for all years.
Re: Body to frame pads
Posted: Thu Dec 29, 2022 12:12 pm
by Datsunparts.comInc
Nissanman wrote: ↑Wed Dec 28, 2022 11:56 pm
Dean at Datsunparts.com has the correct rubbers for the
RED mounts.
https://datsunparts.com/collections/body-parts
The other pads are 10mm/3/8" and are a buffer between the body shell and the chassis.
Their length dimension is quite generous.
Be careful with the two pads that run across the rear crossmember.
Find out where your fuel tank loom is so there is a gap for it between the pads.
Originally Ross at Sports Imports had these and he gave 15 pieces, one extra as a spare. We deliberately give 15 pieces as well. I have been selling these fiber reinforced ones for 18 years. QuickBooks count stands at 481 sets sold.
The mesh fiber in our pads are within the rubber compound, as they should be, so there will be no water saturation into an all fiber pad
Now enjoy them on sale when we return.
https://datsunparts.com/collections/bod ... 9254094008
Dean
Re: Body to frame pads
Posted: Fri Dec 30, 2022 11:51 am
by D P
Thanks for all the replies. Happy New Years!