Datsun Roadster Forum-311s.org

Many of you know I have done many drawings to help people understand and find problems with their wiring. To look for one that might help you go to the link below for the latest versions. There is also a images sub directory that has non electrical stuff in it.

However, I need to go back and change some items on a few so as they say use at your own risk.

Drawings link

Great stuff, thanks Curtis, this is very much appreciated!!!

That is an awesome resource Curtis, thank you!

A true treasure. Thanks Curtis.
Can the tech wiki be updated with these additional diagrams, or perhaps just a link.

That's a lot of great information, Curtis. Thanks for posting this.

Agree. When push comes to shove, “let’s go to Curtis’ schematic!” Thanks!

Thank you for sharing these lists Curtis, it will be really helpful in the future.

You're all welcome. This started as a little project to fill dead time at work. I just seemed to keep going and got carried away in my empathy for owners trying solve in particular sins of previous owners. Some of them were for me to make it easier to build the wiring harnesses, so self serving interest.

When I was trying build a 64 harness the black and white schematic drove me nuts. So as I figured it out and as I built them I colored the schematic. Did the one year 65 for Steve Carter since he owns one. Can't seem to find one in any of the manuals. That one wasn't bad since it is almost identical to the 66.

Thank you Curtis! I also have been using your drawings for troubleshooting my two cars. The schematics are detailed and have always helped in a pinch. I'm currently t/s a problem involving the start and firing circuit.

I think that the only place that I have seen the 65 wiring diagram is in the owner's manual - not the shop manuals.

yep - Curtis' diagram is on my phone home screen haha.

Curtis, that is extremely helpful. Many thanks,

Thanks Curtis. These are most helpful!

Yes, cannot thank you enough for doing these Curtis. I made this a Sticky so it shows at the top and also put a link in the tech wiki.

Curtis Wiring Diagrams


Steve

Speaking of Curtis he hasn't posted in over two weeks. I know he was needing by-pass surgery, hoping he is doing ok?