Weatherstripping install between windshield and door at A pillar

Since the old single thread was getting too long again. Creating a new forum where you can ask your questions and if you get them answered -please indicate the issue was resolved or not.

Moderators: notoptoy, S Allen, Solex68

Post Reply
D P
Roadster Fanatic
Posts: 104
Joined: Mon Jun 13, 2016 4:34 pm
Location: Vancouver, BC
Model: 1500/1600
Year: Low Windshield-64-67.5

Weatherstripping install between windshield and door at A pillar

Post by D P »

Hi, my car never had weatherstrip between the door and windshield. I bought some from Dean, but am not 100% sure how it should be oriented. Can anyone share a photo of how theirs sits? Low windshield 67.5.

Here's a photo of mine and the new weatherstip looking down.

Thanks in advance.

[attachment=0]Resized_20210815_093935_2148.jpeg[/attachment]
You do not have the required permissions to view the files attached to this post.
User avatar
Gregs672000
Roadster Fanatic-Site Supporter
Posts: 9033
Joined: Fri Aug 07, 2009 11:47 pm
Location: Tacoma, WA

Re: Weatherstripping install between windshield and door at A pillar

Post by Gregs672000 »

Hey, I'm sorry, I didn't understand what you were asking about in your pm to me...
Here's a pic. Hope this helps. It clips around the metal plate on the edge, and that plate is screwed to the frame. The rubber feels glued to that strip (done many years ago).
You do not have the required permissions to view the files attached to this post.
Greg Burrows
'67 2000 #588
Tacoma, WA
D P
Roadster Fanatic
Posts: 104
Joined: Mon Jun 13, 2016 4:34 pm
Location: Vancouver, BC
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: Weatherstripping install between windshield and door at A pillar

Post by D P »

Thanks Greg!

(Nice visors!)
Post Reply