Page 1 of 1
Libra wheels
Posted: Sat Dec 05, 2020 12:42 pm
by 69roadster
I looking to purchase a set Libra wheels for mydster. The seller told me they are 63mm bore. Does anyone know if they will fit the roadster front hub.
Thanks
Re: Libra wheels
Posted: Sat Dec 05, 2020 7:56 pm
by theunz
The widest part of the front hub is reported to be 73-76mm. Sometimes, if it’s thick enough, you can bevel the bore of the wheel where it mates to the hub. Look at your hub to see how deep you would have bevel.
Re: Libra wheels
Posted: Sat Dec 05, 2020 9:02 pm
by 69roadster
Thanks
Re: Libra wheels
Posted: Sat Dec 05, 2020 9:08 pm
by spl310
I think that any vintage Libre will fit just fine.
Re: Libra wheels
Posted: Mon Dec 07, 2020 6:39 pm
by 69roadster
Thanks for the feedback. I picked up the wheels today the fix just fine. Now what product do you guys recommen to polish the lip on the wheels
Re: Libra wheels
Posted: Mon Dec 07, 2020 6:44 pm
by todd lorber
Elbow grease is free, and Mother's Aluminum polish works well. You might want to first wet sand with 1000 grit first. It just depends upon the condition of the lips and how scratched or dinged they are.
Re: Libra wheels
Posted: Tue Feb 02, 2021 9:05 pm
by buenavides1
Would you mind sharing a photo of this wheel on your car?
Re: Libra wheels
Posted: Tue Feb 02, 2021 11:16 pm
by Alvin