Libra wheels

69roadster · Post by **69roadster** » Sat Dec 05, 2020 12:42 pm

I looking to purchase a set Libra wheels for mydster. The seller told me they are 63mm bore. Does anyone know if they will fit the roadster front hub.
Thanks

theunz · Post by **theunz** » Sat Dec 05, 2020 7:56 pm

The widest part of the front hub is reported to be 73-76mm. Sometimes, if itâ€™s thick enough, you can bevel the bore of the wheel where it mates to the hub. Look at your hub to see how deep you would have bevel.

69roadster · Post by **69roadster** » Sat Dec 05, 2020 9:02 pm

Thanks

Post by **spl310** » Sat Dec 05, 2020 9:08 pm

I think that any vintage Libre will fit just fine.

69roadster · Post by **69roadster** » Mon Dec 07, 2020 6:39 pm

Thanks for the feedback. I picked up the wheels today the fix just fine. Now what product do you guys recommen to polish the lip on the wheels

todd lorber · Post by **todd lorber** » Mon Dec 07, 2020 6:44 pm

Elbow grease is free, and Mother's Aluminum polish works well. You might want to first wet sand with 1000 grit first. It just depends upon the condition of the lips and how scratched or dinged they are.

buenavides1 · Post by **buenavides1** » Tue Feb 02, 2021 9:05 pm

Would you mind sharing a photo of this wheel on your car?

Alvin · Post by **Alvin** » Tue Feb 02, 2021 11:16 pm

Lots of pictures of Libras in many finishes, including polished lips in the wheel/tire thread:
viewforum.php?f=34

Datsun Roadster Forum-311s.org

Libra wheels

Libra wheels

Re: Libra wheels

Re: Libra wheels

Re: Libra wheels

Re: Libra wheels

Re: Libra wheels

Re: Libra wheels

Re: Libra wheels