A am doing a frame off on my 67.5 SPL & have a part I thought was a heat shield for the left front engine mount or exhaust system but nothing matches. I checked the parts manual on line & didn't see anything there.
The holes are 3/8", spaced 1-15/16" apart.
Any help would be appreciated.
Keep well.
Peace,
Pat
Need help identifying sheet metal part
Moderators: notoptoy, S Allen, Solex68
- Habitat.pat
- Roadsteraholic
- Posts: 606
- Joined: Thu Jul 07, 2016 8:29 pm
- Location: Central Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Need help identifying sheet metal part
You do not have the required permissions to view the files attached to this post.
67.5 SPL311 Stroker Restomod
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
- tjp
- Site Supporter
- Posts: 2563
- Joined: Wed Aug 20, 2008 5:49 am
- Location: Belleville, WI
Re: Need help identifying sheet metal part
It appears to be a home made something or other.
My junk pile:
71 Jeep Gladiator. Restored w/#s matching engine. My WeeBeasty
70 1600 legit 2nd owner. Stroked and bored
Several salvaged w access to a barn full of parts, part cars & whole cars
......What's in the barn is for sale. What do you need?
71 Jeep Gladiator. Restored w/#s matching engine. My WeeBeasty
70 1600 legit 2nd owner. Stroked and bored
Several salvaged w access to a barn full of parts, part cars & whole cars
......What's in the barn is for sale. What do you need?
- Curtis
- Site Supporter
- Posts: 4070
- Joined: Fri Jan 01, 2010 2:49 pm
- Location: Des Moines, WA
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Need help identifying sheet metal part
Here's the real one.
And the bracket that hooks to the mount and manifold.
And the bracket that hooks to the mount and manifold.
You do not have the required permissions to view the files attached to this post.
66 stroker, almost done.
67 basket case, paint coming soon.
67 basket case, paint coming soon.
- Habitat.pat
- Roadsteraholic
- Posts: 606
- Joined: Thu Jul 07, 2016 8:29 pm
- Location: Central Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Need help identifying sheet metal part
Thanks, Curtis, where does it go?
Peace,
Pat
Peace,
Pat
67.5 SPL311 Stroker Restomod
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
- notoptoy
- Vendor-Site Supporter
- Posts: 9677
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: Need help identifying sheet metal part
I believe this is a heat shield on the exhaust manifold at the engine mount.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- Habitat.pat
- Roadsteraholic
- Posts: 606
- Joined: Thu Jul 07, 2016 8:29 pm
- Location: Central Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Need help identifying sheet metal part
Ok, there it is. I tried mounting it to the mount when it’s mounted to the exhaust manifold.
Keep well.
Peace,
Pat
Keep well.
Peace,
Pat
67.5 SPL311 Stroker Restomod
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT