Not Much Wheel Selection

[ahgrafx]

Here they are

[Alvin]

Here they are

Ahhhh yes, the General Lee wheels!
Very popular on roadsters, "American Racing Vector"

just a sample: Victor (RIP) and Leigh's

[RBMann]

Does anyone know what wheels these are in the front?

I believe that I was correct above:

https://www.stockwheels.com/mazda-rx7-1 ... -wheel-rim?

The wheels in the pic have ten holes. Do the Mazdas come in eight and ten?

[Alvin]

Here they are

Dana's '70 SRL 195/70/14 tires

[john sirois]

Has anyone re-rim the original steel wheels for wider tires. I saw a Volvo pv444 with wider rims on the stock hubs and caps it looked pretty sweet and sleepy.

John Sirois
67 1600/2000
Boxford MA

[Alvin]

Has anyone re-rim the original steel wheels for wider tires. I saw a Volvo pv444 with wider rims on the stock hubs and caps it looked pretty sweet and sleepy.

John Sirois
67 1600/2000
Boxford MA

yes

[Pjackb]

Has anyone re-rim the original steel wheels for wider tires. I saw a Volvo pv444 with wider rims on the stock hubs and caps it looked pretty sweet and sleepy.

John Sirois
67 1600/2000
Boxford MA

Yes

viewtopic.php?f=34&t=32538

HERE'S WHEN THEY CAME BACK FROM THE SHOP COMPARED TO ORIGINAL

[ahgrafx]

PSX_20211020_144823.jpg

Just found these old school jdm wheels wondering if they will fit the guy says he will get me the offset a couple days ago but hasn't. I've posted a screen grab with the offset stamped but I can barely make it out. What do you guys think, haven't really seen these on a roadster.

[ahgrafx]

+16?

[rwmann]

‘XCITING’ knock-off of BBS center locks with turbine hat sections, but look good!

Agree with ‘+16’

[ahgrafx]

Would they work

[Alvin]

Would they work

If you can confirm that the center bore is at least 73mm wide and bolt pattern is 4x114.3 then you should be good!

[ahgrafx]

They are posted as 4x114.3 6 1/3” x 14

Would they work

If you can confirm that the center bore is at least 73mm wide and bolt pattern is 4x114.3 then you should be good!

[Pjackb]

PSX_20211020_144823.jpgJust found these old school jdm wheels wondering if they will fit the guy says he will get me the offset a couple days ago but hasn't. I've posted a screen grab with the offset stamped but I can barely make it out. What do you guys think, haven't really seen these on a roadster.

These are Autobahn Xciting X1 from the early 80s and not very common

14x6.33 with an offset of +16 Center bore is not published but these were made for JDM cars of that era and most likely a 73-76mm CB
Those specs will work perfectly with your 67.5 (they would stick out on a 65-67) if dropped 195/60/14s are a good choice but (195/65/14are better IMO)
Not sure how they will look on a roadster but they would be awesome on a 510

[ahgrafx]

PSX_20211020_144823.jpgJust found these old school jdm wheels wondering if they will fit the guy says he will get me the offset a couple days ago but hasn't. I've posted a screen grab with the offset stamped but I can barely make it out. What do you guys think, haven't really seen these on a roadster.

Thanks pjack what is different about the 67.5 versus the 65-67 that works make then stick out? Different rear end?

These are Autobahn Xciting X1 from the early 80s and not very common

14x6.33 with an offset of +16 Center bore is not published but these were made for JDM cars of that era and most likely a 73-76mm CB
Those specs will work perfectly with your 67.5 (they would stick out on a 65-67) if dropped 195/60/14s are a good choice but (195/65/14are better IMO)
Not sure how they will look on a roadster but they would be awesome on a 510