67 1600, whats a fair price?

Moderators: notoptoy, S Allen, Solex68

Post Reply
datsunroadster
Roadster Newby
Posts: 17
Joined: Fri May 13, 2016 4:47 pm
Location: Ocean City Maryland

Re: 67 1600, whats a fair price?

Post by datsunroadster »

fj20spl311 wrote:Is it getting late or ?

I don't read that frame VIN as being the same as the plate.
That 5th digit is not a "9" ....look at the font in the ID plate.
I read the # as 11198 on both.
datsunroadster
Roadster Newby
Posts: 17
Joined: Fri May 13, 2016 4:47 pm
Location: Ocean City Maryland

Re: 67 1600, whats a fair price?

Post by datsunroadster »

bakerjf wrote:
datsunroadster wrote:Fyi: If Trailer Man faked this ID Tag, dirty engine pad, or frame #'s, tjen he should be working for CSI or as a props specialist. LmaoIMG_5309_zps9qmn9dy3.jpgIMG_5305_zpsmli4zgam.jpgIMG_5307_zpsumr6qhfp.jpg
Don't know if you have a car yet, but there are plenty of matching number examples here on the West Coast, with solid frames... Also, while 67.5 2000's are indeed rare, 67.5 1600's really aren't. Out here, that car would be good for one thing - parts. The economics of trying to turn that into anything makes zero sense me.
I hear you. I'm not 100% on this car. Especially at $5000. If I can buy it at anywhere from $2000- $3500 or maybe even $4000 max, I think its worth it. Shipping out from the west coast will run me a bit of change that I have to factor. Plus I'm looking for a project. Need something to do this summer. Let me know if you have something. The passenger side frame doesnt scare me. I've done frames on many cars. Datsuns are one of the easiest and cheapest to fix or replace. I just have to sell one of my many toys this weekend before the wife flips shit again. Lol
User avatar
fj20spl311
Roadsteraholic
Posts: 5007
Joined: Mon Nov 28, 2005 3:54 pm
Location: San Diego, Ca

Re: 67 1600, whats a fair price?

Post by fj20spl311 »

There is/was a guy in Virginia Craig screen name "672000" that had a field of Roadsters.
Might try running him down.
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
User avatar
notoptoy
Vendor-Site Supporter
Posts: 9674
Joined: Fri Oct 02, 2009 2:55 pm
Location: Winston-Salem, NC and Ocala, FL
Contact:

Re: 67 1600, whats a fair price?

Post by notoptoy »

Craig Halsted, 672000 has a lot of stuff he'd be happy to move.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.

67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
User avatar
bakerjf
Site Supporter
Posts: 1383
Joined: Wed Sep 07, 2011 5:48 pm

Re: 67 1600, whats a fair price?

Post by bakerjf »

datsunroadster wrote:
bakerjf wrote:
datsunroadster wrote:Fyi: If Trailer Man faked this ID Tag, dirty engine pad, or frame #'s, tjen he should be working for CSI or as a props specialist. LmaoIMG_5309_zps9qmn9dy3.jpgIMG_5305_zpsmli4zgam.jpgIMG_5307_zpsumr6qhfp.jpg
Don't know if you have a car yet, but there are plenty of matching number examples here on the West Coast, with solid frames... Also, while 67.5 2000's are indeed rare, 67.5 1600's really aren't. Out here, that car would be good for one thing - parts. The economics of trying to turn that into anything makes zero sense me.
I hear you. I'm not 100% on this car. Especially at $5000. If I can buy it at anywhere from $2000- $3500 or maybe even $4000 max, I think its worth it. Shipping out from the west coast will run me a bit of change that I have to factor. Plus I'm looking for a project. Need something to do this summer. Let me know if you have something. The passenger side frame doesnt scare me. I've done frames on many cars. Datsuns are one of the easiest and cheapest to fix or replace. I just have to sell one of my many toys this weekend before the wife flips shit again. Lol
...all good. In addition to matching numbers, "California car it's whole life" would also enhance its pedigree down the road.
J. Baker
Lafayette, CA
'69 2000 (Solex)
kevbo82
Roadster Newby
Posts: 19
Joined: Thu May 12, 2016 6:02 pm

Re: 67 1600, whats a fair price?

Post by kevbo82 »

obviously in all car realms "numbers matching" is worth something to someone, to me thats exactly the point. Whats it worth to you? It's like an auction, get the right two guys in a room and tug their heart strings with a car and a "new value" can be set for a car. I would assume that trailer guys reserve is at least $2500, and bidding often heats up in the last few hours on ebay. I think if his reserve is below $3k it will sell. I think the car was worth the $2k when I looked at it, but I wasn't exactly desperate/hungry to find one right at this minute (need a new garage first!), so frame rust made it easy to pass up for me, but i'm sure it will make a great project for someone out there.
User avatar
fj20spl311
Roadsteraholic
Posts: 5007
Joined: Mon Nov 28, 2005 3:54 pm
Location: San Diego, Ca

Re: 67 1600, whats a fair price?

Post by fj20spl311 »

One less Flipper to worry about.
I hope he at least gets his $2K back, but I would bet he learned his lesion on flipping Datsun Roadsters
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
User avatar
Linda
Fraternal Den Mother-RIP
Posts: 7807
Joined: Sat Nov 05, 2005 11:37 pm
Location: Los Angeles
Model: 1500/1600
Year: High Windshield-68-70

Re: 67 1600, whats a fair price?

Post by Linda »

One less Flipper to worry about.
I hope he at least gets his $2K back, but I would bet he learned his lesion on flipping Datsun Roadsters
Lesions? Phil, you're a genius but you can't spell LOL

Linda :lol:
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
User avatar
bakerjf
Site Supporter
Posts: 1383
Joined: Wed Sep 07, 2011 5:48 pm

Re: 67 1600, whats a fair price?

Post by bakerjf »

image.jpeg
You do not have the required permissions to view the files attached to this post.
J. Baker
Lafayette, CA
'69 2000 (Solex)
User avatar
fj20spl311
Roadsteraholic
Posts: 5007
Joined: Mon Nov 28, 2005 3:54 pm
Location: San Diego, Ca

Re: 67 1600, whats a fair price?

Post by fj20spl311 »

Linda wrote:
lesion
Lesions? Phil, you're a genius but you can't spell LOL

Linda :lol:
Linda, your a "Cut Up"
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
User avatar
Linda
Fraternal Den Mother-RIP
Posts: 7807
Joined: Sat Nov 05, 2005 11:37 pm
Location: Los Angeles
Model: 1500/1600
Year: High Windshield-68-70

Re: 67 1600, whats a fair price?

Post by Linda »

LOL 8)
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
Rep529
Forum Newb
Posts: 2
Joined: Wed Apr 27, 2016 2:17 pm

Re: 67 1600, whats a fair price?

Post by Rep529 »

I won the bid for the 1967 Datsun that you guys are talking about, now got to get it to California soon.
User avatar
fj20spl311
Roadsteraholic
Posts: 5007
Joined: Mon Nov 28, 2005 3:54 pm
Location: San Diego, Ca

Re: 67 1600, whats a fair price?

Post by fj20spl311 »

congratulations.
Please post pictures of you progress on bringing her back to life.
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
kevbo82
Roadster Newby
Posts: 19
Joined: Thu May 12, 2016 6:02 pm

Re: 67 1600, whats a fair price?

Post by kevbo82 »

Rep529 wrote:I won the bid for the 1967 Datsun that you guys are talking about, now got to get it to California soon.
Congratulations, if you start a build thread on this site or any others please post a link here, I would love to watch it come back to life. Best of luck with it!
Rep529
Forum Newb
Posts: 2
Joined: Wed Apr 27, 2016 2:17 pm

Re: 67 1600, whats a fair price?

Post by Rep529 »

The 1967.5 Roadster got delivered Friday
I did get it started, just changed wires, rotor, and fuel filter. And bought new battery. I also by passed the gas tank and used a temporary container as a fuel tank and she started right up. Then I had to change the clutch slave and clutch master and she drives fine. But sadly this car will need major rust repair to the frame.
Maybe to much work for me, I might resell it or just drive it for awhile then sell it.
You do not have the required permissions to view the files attached to this post.
Post Reply