wheel fitment...

[rudesvx]

hi all...

I may have the op to purchase a set of rb wheels that are 16x7 +22. They already have tires installed (front: 205/50/16 and rear: 225/50/16). I was going planning to use a 10mm spacer to bring the offset tothe ideal 12mm. Would anyone know if this set up rub any fenders or frames for a 68? I'm also planning to purchase some lowering springs for the front down the road. Thanks in advance!

[RCMike]

225 will be wide unless there is some significant work done to the rear fenders. But that is the exact set of wheels I used for more than a year, and they work well on a 68 with a 205/50-16 and a 10mm spacer.

[garth]

I have 205/55-15 Yokohamas on +20 wheels and they rub high up the outside rear wheel wells on hard cornering. I am going back down to 195/50-15 after I burn off the sidewalls.

[Alvin]

I agree 225/50/16 will rub in the back, even worse when lowered.