Swedge Steering links w/ Heims
Posted: Fri Feb 28, 2014 12:21 pm
These are currently available for $250. The Zinc coated bars are made out of Swedge Steel Tubes, and the heims are QA1. These come standard with everything you need to install including washers, lock nuts and grade 8 bolts. Install and adjustment is made easy with one reverse threaded end. Simply screw the heims all the way in, install, twist the bar and both ends will adjust evenly for alignment. Email to place your order is Fastnigel@yahoo.com Feel free to contact him or me with any questions. If you are feeling uncomfortable since i am newer and you dont know him, i will list some references below.
Some pictures installed on my frame
http://www.311s.org/phpBB3/viewtopic.ph ... 1&start=15
My username can be found on the following sites as an active member that has buying/selling credability, both under the same user name:AspitFire
http://www.mnsubaru.com
http://www.nasioc.com
Nigel and his fabrication skills can be found here: TyConway
http://forums.nasioc.com/forums/showthr ... ?t=2422908
Some pictures installed on my frame
http://www.311s.org/phpBB3/viewtopic.ph ... 1&start=15
My username can be found on the following sites as an active member that has buying/selling credability, both under the same user name:AspitFire
http://www.mnsubaru.com
http://www.nasioc.com
Nigel and his fabrication skills can be found here: TyConway
http://forums.nasioc.com/forums/showthr ... ?t=2422908