Which hose size/type to use.
Moderators: notoptoy, S Allen, Solex68
- Kendall124
- Site Supporter
- Posts: 243
- Joined: Thu Jun 13, 2013 7:55 pm
- Location: Out in the garage, Seattle WA
Which hose size/type to use.
Howdy Gang,
Need to replace the hose that goes between the filler cap through the trunk gasket to the gas tank. Would an old chunk of radiator hose work? Don't want to chemically melt anything. Breather hose too.
Thanks,
Kendall
Need to replace the hose that goes between the filler cap through the trunk gasket to the gas tank. Would an old chunk of radiator hose work? Don't want to chemically melt anything. Breather hose too.
Thanks,
Kendall
1968 SPL-311 SR20DE #18547
"Gentlemen, start your wallets!"
"Gentlemen, start your wallets!"
- notoptoy
- Vendor-Site Supporter
- Posts: 9686
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: Which hose size/type to use.
You need to get something rated for fuel, I would not use an old radiator hose.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- Kendall124
- Site Supporter
- Posts: 243
- Joined: Thu Jun 13, 2013 7:55 pm
- Location: Out in the garage, Seattle WA
Re: Which hose size/type to use.
Yeah, neither would I. O'Reilly has some. Comes in 3' lengths. Looks like 1.5" diameter. She really sloshes around when hitting the corners. My girlfriend was a little concerned about the smell. I told her smelling gas, though not good, was better than smelling smoke. I told he we'd try to out run the flames. She just smiled and said "please fix that."
1968 SPL-311 SR20DE #18547
"Gentlemen, start your wallets!"
"Gentlemen, start your wallets!"
- dbrick
- Roadster Fanatic-Site Supporter
- Posts: 10084
- Joined: Thu Sep 09, 2004 11:05 pm
- Location: Kenilworth, New Jersey
Re: Which hose size/type to use.
Dean sells a Gates hose, cut to approx size I believe. For a TEMPORARY fix until proper hose arrives, you can wrap it with self fusing silicone tape. I would also check the smaller vent hose, they tend to get very stiff up on top of the tank, it's standard fuel line..
Dave Brisco
Take my advice, I'm not using it"
66 2000 The Bobster
64 1500 in pieces for sale
1980 Fiat X1/9
2009 Volvo C-70
08 Expedition EL, STUPID huge but comfy
1962 Thompson Sea Lancer, possible money pit
- bikermike
- Site Supporter
- Posts: 1763
- Joined: Wed Jul 06, 2011 4:06 pm
- Location: Denver Area, CO
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Which hose size/type to use.
From the techwiki:
http://www.311s.org/pmwiki-311/pmwiki.p ... nterchange
Rubber Bits
•Fuel filler hose-Gates lists 1 7/8, 3 foot lengths.
Product ID 46633603, Part #23930---Product Description 23930 1-7/8" X3FT FUEL FILL--UPC 072053062663(ALL)
It looks like Dayco 80305 is also a 1 7/8" ID x 3ft long fuel hose.
http://www.311s.org/pmwiki-311/pmwiki.p ... nterchange
Rubber Bits
•Fuel filler hose-Gates lists 1 7/8, 3 foot lengths.
Product ID 46633603, Part #23930---Product Description 23930 1-7/8" X3FT FUEL FILL--UPC 072053062663(ALL)
It looks like Dayco 80305 is also a 1 7/8" ID x 3ft long fuel hose.
You do not have the required permissions to view the files attached to this post.
Last edited by bikermike on Sat Mar 08, 2014 10:16 pm, edited 2 times in total.
-Mike
1967.5 SPL311
1972 240z / L28
2003 BMW 525i Touring
2014 Jeep KL
1967.5 SPL311
1972 240z / L28
2003 BMW 525i Touring
2014 Jeep KL
- spl310
- Roadster Guru
- Posts: 13237
- Joined: Sun Dec 29, 2002 10:38 pm
- Location: In front of this keyboard... in Jacksonville, Florida!
Re: Which hose size/type to use.
The local ACE Hardware sells the Gates hose here as does Advance Auto Parts.
"Wow, a Roadster!" Stuart Little
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
- Solex68
- Site Supporter
- Posts: 2178
- Joined: Fri May 25, 2012 3:30 pm
- Location: Laguna Hills, CA
- Model: 2000
- Year: High Windshield-68-70
- Contact:
Re: Which hose size/type to use.
I bought the Gates hose and it is very good. Very rugged. I had a hard time making a clean cut through it. It has a thick steel wire running though it. But once that is cut. Your good.
Greg a.k.a SOLEX68 - http://www.datsunvents.com/
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: All steering components, Stan Stealth Dizzy
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: All steering components, Stan Stealth Dizzy
- Kendall124
- Site Supporter
- Posts: 243
- Joined: Thu Jun 13, 2013 7:55 pm
- Location: Out in the garage, Seattle WA
Re: Which hose size/type to use.
Thanks for all the tips/info. Great site.
1968 SPL-311 SR20DE #18547
"Gentlemen, start your wallets!"
"Gentlemen, start your wallets!"
- sports imports
- Vendor-Site Supporter
- Posts: 1092
- Joined: Fri Aug 25, 2006 10:41 am
- Location: Surrey, BC
- Contact:
Re: Which hose size/type to use.
we carry pre cut hose for the fuel filler. $15
Ross
sports imports
Ross
sports imports
- bikermike
- Site Supporter
- Posts: 1763
- Joined: Wed Jul 06, 2011 4:06 pm
- Location: Denver Area, CO
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Fuel filler hose
bump...added Dayco 80305 as another choice for a hose. See above.
-Mike
1967.5 SPL311
1972 240z / L28
2003 BMW 525i Touring
2014 Jeep KL
1967.5 SPL311
1972 240z / L28
2003 BMW 525i Touring
2014 Jeep KL
- dbrick
- Roadster Fanatic-Site Supporter
- Posts: 10084
- Joined: Thu Sep 09, 2004 11:05 pm
- Location: Kenilworth, New Jersey
Re: Which hose size/type to use.
Probably a big savings over buying a 3 foot length.sports imports wrote:we carry pre cut hose for the fuel filler. $15
Ross
sports imports
Dave Brisco
Take my advice, I'm not using it"
66 2000 The Bobster
64 1500 in pieces for sale
1980 Fiat X1/9
2009 Volvo C-70
08 Expedition EL, STUPID huge but comfy
1962 Thompson Sea Lancer, possible money pit
-
- Roadster Newby
- Posts: 20
- Joined: Sun Aug 18, 2024 10:02 pm
- Location: Fort Worth, TX
- Model: 2000
- Year: High Windshield-68-70
Re: Which hose size/type to use.
bikermike wrote: ↑Sat Jun 22, 2013 11:32 pm From the techwiki:
http://www.311s.org/pmwiki-311/pmwiki.p ... nterchange
Rubber Bits
•Fuel filler hose-Gates lists 1 7/8, 3 foot lengths.
Product ID 46633603, Part #23930---Product Description 23930 1-7/8" X3FT FUEL FILL--UPC 072053062663(ALL)
Dayco 80305 to Gates 23930 Fuel Hose.jpg
If you need this and have an O'Reilly Auto Parts near you, they show to stock it. $28.99/foot.
https://www.gates.com/us/en/store-locator.html