Page 1 of 1
Anybody know what a battery holder for a 65 410 looks like?
Posted: Sat Nov 26, 2011 11:49 pm
by Datsun.David
The bungee cord is so bush league... I have tried a roadster set up, and one from a Z, but I don't know what the original one looked like, so I'm not sure what to try and replace it with... Haven't looked around too much, but I thought someone here might have seen one on a 410/411 maybe the same on early trucks with the E1 engine too...
Thanks!
David.
Re: Anybody know what a battery holder for a 65 410 looks li
Posted: Mon Nov 28, 2011 12:09 pm
by sports imports
my 65 410 wagon came with a long narrow battery( type 53 if I recall) like the 1500 and early 1600 roadsters. It looks as though you have a type 24 battery. In either case, i have the battery hold down for either battery.
Ross
sports imports
Re: Anybody know what a battery holder for a 65 410 looks li
Posted: Thu Dec 01, 2011 8:31 pm
by harrison
do you have a spare master clutch cylinder?
i need one
or will the 510 or 240z one work too?
Re: Anybody know what a battery holder for a 65 410 looks li
Posted: Thu Dec 01, 2011 11:10 pm
by Datsun.David
See my other note Harrison...
dw
Re: Anybody know what a battery holder for a 65 410 looks li
Posted: Thu Dec 08, 2011 6:23 am
by 1600dave
Scans from the 410 factory spares manual.
Its a Japanese published manual, so "Domestic" and "Export" refers to Japan / non-Japan rather than USA / non-USA
Apologies for the poor scan quality, one day I'll get around to scanning the whole manual properly.
08121102.PDF
08121103.PDF
Re: Anybody know what a battery holder for a 65 410 looks li
Posted: Thu Dec 08, 2011 1:02 pm
by Datsun.David
Thanks a lot! Ross and I are trying to find a frame that will fit... I realized after the fact that I too have that manual and didn't even think to take a look at it... The pictures in that manual are awesome and I have now got it front and centre. It also helped me ID a NOS carb that a vendor has listed on Ebay.
Re: Anybody know what a battery holder for a 65 410 looks li
Posted: Fri Dec 09, 2011 1:58 am
by 1600dave
I'm not 100% sure, but the larger one with the "frame" around the top of the battery looks suspiciously like the holder on my old 510. The "tabs" for the holding-down bolts may be in a slightly different spot ??
Can't check for you as I replaced it with a better, stronger one on my 510 years ago to satisfy scrutineers that the battery wouldn't move during a race.