Will 280Z Snowflake wheels fit Roadster

[Gregs672000]

Those look very likely. Sounds like you could ask them to confirm it.

[tracken]

Hi I am from the land down under and purchased 20 nuts for my 6 spoke 280zx wheels which run 195 x 70 14" and the nuts came from USA here is a list of suppliers
http://www.ebay.com.au/itm/7-16-Chrome- ... 3f1250ff37" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

http://vi.ebaydesc.com.au/ws/eBayISAPI. ... 3&caz.html" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

http://www.ebay.com/itm/20-Toyota-Premi ... 1087338064" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

[youtube][/youtube]

[Gregs672000]

Thanks!

[shadesh]

I'm sorry, but I have to revive this posting. I am a bit confused still. I have the 280Z 6 spoke wheels for my 1968 Roadster. I still have the original Roadster studs on mine and need to buy the lugs for the Z 6 spoke wheels. Can someone confirm the below part numbers and measure so that I can order it today. Please.

It is listed on: http://www.ezaccessory.com/Toyota_Lexus ... /5001t.htm" onclick="window.open(this.href);return false;

Description:
Toyota, Lexus OEM mag style 7/16"-20 threads nice chromed lug nuts. They fit factory wheels from Toyota trucks and cars (except Land Cruiser 1998-on) or Lexus (except LX 470) to 7/16" hub studs. Washers are built in. Our application guide page will answer most of your application fitment questions but ask us for unanswered question. Sold in each piece.

Size:
•Toyota OEM mag style
•7/16"-20 thread size
•13/16" hex size
•built-in washers

[fj20spl311]

The important measurement is the diameter of the shank....
0.73 inches

Without looking, that sounds correct.....
You can measure the holes in your wheels to make sure they are correct.

Go to your favorite discount tool or auto parts and buy a digital vernier for $10-20.

EDIT:......0.73 is the correct diameter.

[tracken]

as previously stated. I have fitted the 6 spoke to my car, the nuts you require to fit factory 280z wheels to a roadster that's ***ALL roadsters****
Are below.
http://www.ebay.com.au/itm/7-16-Chrome-" onclick="window.open(this.href);return false; ... 3f1250ff37" onclick="window.open(this.href);return false;

http://vi.ebaydesc.com.au/ws/eBayISAPI" onclick="window.open(this.href);return false;. ... 3&caz.html" onclick="window.open(this.href);return false;

http://www.ebay.com/itm/20-Toyota-Premi" onclick="window.open(this.href);return false; ... 1087338064" onclick="window.open(this.href);return false;

[spl310]

as previously stated. I have fitted the 6 spoke to my car, the nuts you require to fit factory 280z wheels to a roadster that's ***ALL roadsters****
Are below.
http://www.ebay.com.au/itm/7-16-Chrome-" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; ... 3f1250ff37" onclick="window.open(this.href);return false;

http://vi.ebaydesc.com.au/ws/eBayISAPI" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;. ... 3&caz.html" onclick="window.open(this.href);return false;

http://www.ebay.com/itm/20-Toyota-Premi" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; ... 1087338064" onclick="window.open(this.href);return false;

While they may bolt on, they may foul on the earlier fenders with smaller flares. Especially us 1500 guys...

BTW, your links aren't working. How about giving the ebay auction numbers.

[Gregs672000]

The 280zx 6 spokes fit fine. I had to use one inch spacers to fit them into my flairs (and longer studs, and modified the wheel so the lug went through the wheel and into the spacer), so I think they will be fine stock. I had to use a 1/4" spacer for the fronts but that was to clear the Toyota brake conversion (no other mods for the front, assuming one has the correct lug nuts as discussed).

BTW, these will all be for sale with nearly new tires soon!

[SDkvrd]

The 280zx 6 spokes fit fine.... to clear the Toyota brake conversion (no other mods for the front, assuming one has the correct lug nuts as discussed).

At the boneyard those lug nuts used to be like acorns on the ground, just pick 'em up...very common. They fit all 280ZX and ZXt factory alloys. 1984 and later 300Z lugnuts are slightly different still, but have identical thread to the prior Z models (12mm X 1.25)